top of page

FGN ODYSSEY EXPERT 

EOS-ASH-M

See-Thru Blue Burst

EOS_ASH_M (SBB)_11_edited_edited
EOS_ASH_M (SBB)_12_edited_edited_edited
EOS_ASH_M (SBB)_02
EOS_ASH_M (SBB)_03
EOS_ASH_M (SBB)_04
EOS_ASH_M (SBB)_05
EOS_ASH_M (SBB)_06
EOS_ASH_M (SBB)_07

FGN ODYSSEY EXPERT
EOS-ASH-M
SPECIFICATIONS
 
Made in Japan by FUJIGEN
since 1960
 

CONSTRUCTION : Bolt-On

BODY: 2pc American Swamp Ash

NECK : 1pc Maple Quarter Sawn U-Shape
with Luminous Side Dots

FINGERBOARD : Maple
(250-350 mmR Compound Radius)

FRET : 22F Medium
(C.F.S / Circle Fretting System)
Rounded / Hand-filed Expert Fret Edge Treatment

SCALE : 25.5'' (648mm)

PICKUPS : Original FGN

Neck : OS-1n (Alnico 5)
Center : OS-1c (Alnico 5)
Bridge : OS-1b (Alnico 2)

CONTROLS : 1Vol, 1Tone, 5Way SW,
2Mini Double Tricky Switch

TUNERS : Gotoh SD91-05MG
Magnum Lock

BRIDGE : Gotoh 510TS-FE1

PARTS COLOR : Chrome (Bridge) & Nickel

FINISH : Gloss

COLOR : SBB - See-Thru Blue Burst

STRINGS : D'Addario EXL110 (.010-.046)

ACCESSORIES : 
Original Hard Case
Fret Guard
Set-up Keys

 

Demo by Micke Nilsson

FGN ODYSSEY EXPERT

EOS-ASH-M

SPECIAL FEATURES

Circle Fretting System

All FGN guitars and basses come with a unique Circle Fretting System (C.F.S.). It was created by FGN based on an idea to offer better pitch and articulation than conventional guitars and basses. All frets are installed on fingerboard in slightly curved shape, so that every string crosses all the frets in 90 degrees, i.e. to offer a minimum contact of string on a fret, and it makes the scale length of every string even while it actually varies on conventional fretting. The C.F.S. is a solution of fretting on a traditional guitar and bass and it offers clearer articulation and tones which give dimension when you play a cord and also cut through the mix when you play single notes.

 

*The frets we use aren't special. You can ask your nearest repair shop to hit them from the edge of the fingerboard when refret.

Low setting set up / Effortless Playability

FGN's unique and original neck-joint system improves the overall resonance of the guitar. The angle of the neck and body joint is a critical factor in the set-up of a stringed instrument. While string height is adjustable at the bridge, FGN's neck-joint system not only improves the overall resonance of the guitar it also supports extra low string action.

Gotoh 510TS Bridge

The combination of the 510TS and Low Setting Set up makes clean sound and tight vintage tensions for all guitar players.

Double Tricky Switch

Neck side SW : Humbucker Direct Out Bridge side SW : Coil Tap Function The mini toggle switch mounted between the volume and tone control knobs allowes for split-coil and direct-out on the bridge humbucker. With the coil tap switch(bridge side), spanning the gap between a more distorted humbucker or a clean sounding single-coil tone. With the direct-out switch(neck side), you'll always leave it if you'd like to to keep playing with a powerful distortion sound.

Moonsault Heel Cutaway

The body heel, neck joint and plate are beautifully contoured to facilitate easy access to high register playing.

Compound Radius

FGN employs a specific "Compound Radius" ratio on the fingerboard, representing advanced fingerboard technology. The neck radius gradually increases over the finger board's length, starting out rounded near the headstock and flattening out toward the neck joint. A diameter of 250mm (10") was selected for the radius at the nut for optimal comfort and grip for chords. A 350mm (14") radius at the heel has proven to be ideal in eliminating any unwanted buzz of string bending that may be caused by over-tightened fingerboard radius traditionally countered by high string action. The Compound Radius affords comfortable and easy bends even with string action below 1.9mm and ensures smooth fingering when playing solo passages high on the neck.

Fret Edge

FGN craftsmen are meticulous in ensuring fret edges are rounded to perfection for a smooth feel on the neck. Position changes are seamless and the aesthetic is flawless.

EOS_ASH_M (SBB)_05.jpg
compound radius.jpg

FGN original pickups (Expert Series)

Designed by Fujigen R&D section and manufactured by Japanese pickup craftsmen who have long experience and great skills. For single pickup, it's used Alnico 5 magnets. The sound is like the mixture of vintage tone in 1960 and modern powerful sustain. We cut the high-tone frequency which has harsh sounds to the ear, and boosted mid-high power range. Besides, it gives a very quick picking response and very useful for blues, fusion, rock, and shred style guitar players. For humbucker pickup, it's used Alnico 2 magnets. The sound is like presistently-mid high powerful tone and goes quite well with our FGN orignal single pickups above mentioned. It also reprises vintage bright and very unique fat sustain tones.

bottom of page