FGN ODYSSEY EXPERT
EOS2-AL-R
Vintage Sunburst
 |  |  |
|---|---|---|
 |  |  |
 |  |
FGN ODYSSEY EXPERT
EOS2-AL-R
SPECIFICATIONS
Made in Japan by FUJIGEN
since 1960
CONSTRUCTION : Bolt-On
BODY : 2pc Alder
NECK : Quarter-sawn 1pc U-shape Maple
with Luminous side dots
FINGERBOARD : ''Rolled Edge'' Rosewood
with Compound Radius (250-350 mmR)
FRETS : 22F Narrow-tall nickel silver
Xpert Fret Edge Treatment
(C.F.S / Circle Fretting System)
SCALE : 25.5" (648mm)
PICKUPS : Original FGN
Custom Made in Japan
Neck : OS-2n (Alnico 5)
Center : OS-2rw (Alnico 5)
Bridge : XPERT-Hf (Alnico 4)
CONTROLS : 1Vol, 1Tone, 5Way Lever SW,
with Double-tricky Switching system
(Direct out SW + Split Coil SW)
TUNERS : Gotoh SG381-07 MG-T
vintage style Magnum Lock tuners
with FGN Three String Tree
BRIDGE : Gotoh 510TS-FE1
PARTS COLOR : Chrome & Nickel
FINISH : Gloss
COLOR : VSB (Vintage Sunburst)
STRINGS : D'Addario EXL110 (.010-.046)
ACCESSORIES : Original Hard Case
Fret Guard
Set-up Keys
FGN ODYSSEY EXPERT
EOS2-AL-R
SPECIAL FEATURES
Double Tricky Switch
Neck side SW : Humbucker Direct Out
Bridge side SW : Coil Tap Function
The mini toggle switch mounted between the volume and tone control knobs allows for split-coil and direct-out on the bridge humbucker. With the coil tap switch (bridge side), spanning the gap between a more distorted humbucker or a clean sounding single-coil tone. With the direct-out switch (neck side), you'll always leave it if you'd like to to keep playing with a powerful distortion sound.
Circle Fretting System
All FGN guitars and basses come with a unique Circle Fretting System (C.F.S.). It was created by FGN based on an idea to offer better pitch and articulation than conventional guitars and basses. All frets are installed on fingerboard in slightly curved shape, so that every string crosses all the frets in 90 degrees, i.e. to offer a minimum contact of string on a fret, and it makes the scale length of every string even while it actually varies on conventional fretting. The C.F.S. is a solution of fretting on a traditional guitar and bass and it offers clearer articulation and tones which give dimension when you play a cord and also cut through the mix when you play single notes.
*The frets we use aren't special. You can ask your nearest repair shop to hit them from the edge of the fingerboard when refret.
Low setting set up / Effortless Playability
FGN's unique and original neck-joint system improves the overall resonance of the guitar. The angle of the neck and body joint is a critical factor in the set-up of a stringed instrument. While string height is adjustable at the bridge, FGN's neck-joint system not only improves the overall resonance of the guitar it also supports extra low string action.
Gotoh 510TS Bridge
The combination of the 510TS and Low Setting Set up makes clean sound and tight vintage tensions for all guitar players.
Maple quarter-sawn 1-pc neck and Moonsault heel cutaway joint to offer stress-free high fret access.
Neck joint and plate are beautifully contoured.
Luminous side dots to glow on the dark stage.
FGN original pickups - Custom Made in Japan
Designed by Fujigen R&D section and manufactured by Japanese pickup craftsmen who have long experience and great skills. For single pickup, it's used Alnico 5 magnets. The sound is like the mixture of vintage tone in 1960 and modern powerful sustain. We cut the high-tone frequency which has harsh sounds to the ear, and boosted mid-high power range. Besides, it gives a very quick picking response and very useful for blues, fusion, rock, and shred style guitar players. For humbucker pickup, it's used Alnico 4 magnets. The sound is like relatively powerful in low-mid range and goes quite well with our FGN orignal single pickups above mentioned. It also reprises vintage bright and very unique fat sustain tones.
Compound Radius
FGN employs a specific "Compound Radius" ratio on the fingerboard, representing advanced fingerboard technology. The neck radius gradually increases over the finger board's length, starting out rounded near the headstock and flattening out toward the neck joint. A diameter of 250mm (10") was selected for the radius at the nut for optimal comfort and grip for chords. A 350mm (14") radius at the heel has proven to be ideal in eliminating any unwanted buzz of string bending that may be caused by over-tightened fingerboard radius traditionally countered by high string action. The Compound Radius affords comfortable and easy bends even with string action below 1.9mm and ensures smooth fingering when playing solo passages high on the neck, while allowing for much easier chord playing at lower frets.
Rolled edge fingerboard with 22F Narrow-tall nickel silver & Xpert fret edge treatment
FGN craftsmen are meticulous in ensuring fret edges are rounded to perfection for a smooth feel on the neck. Position changes are seamless and the aesthetic is flawless.
Luminous side dots to glow on the dark stage
%20compound%20rad%20rolled%20edge%20EOSVSB%20rev.jpg)
